About This

• Adjutable Oil Filter Wrench: Toolwiz oil filter removal tool fits spin-on type oil filters ranging from 2-3/8 inch to 3-7/8 inch (60mm to 98mm). Not suitable for cars or motorcycle with narrow engine compartments and limited access to the oil filter
• Removal-Only Function: One-way mechanism design specifically for loosening and removing oil filters; No installation function. Warm Tips: Recommend installing the new oil filter by hand only (Once the gasket on the filter contacts the engine surface, tighten it an additional 3/4 to 1 full turn by hand)
• 3-Jaw Design with Protective Wrapping: 3 jaws design engage the oil filter from multiple sides to provide stable contact during removal. Each jaw is wrapped with red rubber to help reduce direct metal-to-filter contact and minimize surface damage during use
• Multi-Drive Compatibility: Equipped with a 3/8" to 1/2" adapter, this oil filter tool works with 3/8" and 1/2" square drive ratchets as well as 11/16" (21mm) hex wrenches.
• Oil Change Maintenance Tips: Clean and dry the filter surface before removal for better contact. If needed, place a thin cloth between the jaws and filter to improve engagement. Position the wrench near the base, apply inward pressure, and turn counterclockwise with steady, even force to help keep the jaws engaged and reduce slipping. For installation, hand-tighten only - apply a light coat of oil to the gasket and avoid over-tightening

Overview

• Color : 60-98mm
• Brand : Toolwiz
• Material : Carbon Steel
• Item Length : 3.15 Inches
• Item Weight : 270 Grams